How To Service Your Air Conditioner Yourself and Save Money?

When it comes to your air conditioner, you want to be sure that your unit is running properly before the summer heat rolls in. Summers can be either a great time filled with fun or a season where you’re just sweating a ton because you didn’t get your air conditioner serviced. If you are not getting it serviced because you don’t have the money to hire a professional, then don’t worry! You can easily service your own air conditioner and save a ton of money that way. All you need to do is read down below and you’ll get all the information you need to save yourself money for the other important things in your life.

  1. Make Sure That the Unit Is Turned Off Completely: First off, you need to ensure that you have turned off your unit completely before you start the cleaning and servicing process. You can either do this by turning on the on/off button to the off position or shutting of the circuit breaker. When you do this, you can ensure that nothing will go wrong during the cleaning process.
  1. Check Out the Copper Pipe: The first thing that you should check out is the small copper pipe that connects the unit to your home. If you feel a lot of heat coming from the pipe, then it’s about time that you replace these or wash them off. The heat is a sign that the copper pipes are dirty and are not working efficiently enough.
  1. Clear the Debris Around the Unit: Before you start your air conditioning service process, you need to make sure that you clean out the debris and other dirt that may be blocking it. This includes but is not limited to leaves and sticks from trees.
  1. Take the Cover Off: The next thing that you need to do is to take off the cover of your unit. You will be looking for the air conditioner coils, which look like a car radiator if you are familiar with the parts of your car.

How To Service Your Air Conditioner Yourself and Save Money?

  1. Clear Off the Outside Cover: Once you have that outside over off, you can use a soft brush to get rid of all that extra dirt and debris that may be clogging it up. If there are some more tough pieces of debris that you can’t get off with the brush, feel free to use a bit of water and a little bit more elbow grease to get it off.
  1. Cover Up the Motor and The Wiring: Before you start cleaning out the rest of your unit, you should make sure that you properly cover up the motor and the wiring of your unit with a plastic sheet. This will keep them from getting wet when you clean the inside.
  1. Hose Down the Main Parts of The Unit: There are three main parts of the unit that you’re going to want to clean off with a hose next. Clean down the fins, the coils, and the inside of the air conditioner with a hose to get everything super clean and sparkly.
  1. Check Out the Owner’s Manual: If you haven’t done this yet, then it’s important that you do it before you close up your unit and call it quits for the day. You should check and make sure whether or not your owner’s manual states that the motor needs to be lubricated on your air conditioner. After you do this, then you can continue onto the next step.
  1. Replace the Unit Cover: And lastly, you can close up the unit cover and ensure that everything is working properly. Just turn the unit on and check it out! In addition to all of this cleaning, you should ensure that you are replacing the air filters every few months. These filters can easily get clogged up and cause your air conditioner to run a lot less efficiently and cost you a lot of money.

There you have it! When it comes to servicing your air conditioner, there’s no reason that you need to call an expensive repair guy over – you can do it yourself! Just follow the above steps and you’re going to be golden!

Leave a Reply

top
Loading...